Color Changing Led Submersible Light Great for high bay, low bay, swimming pools and wherever high output lighting is needed. ♒【INGROUND POOL LIGHT WITH CORD】LED Inground Pool Light with 1.5M/4.92feet Cord. Voltage input: AC12V Size: θ1.2/30mmx0.23/H6mm Power cord lengh: 4.9Ft/1.5m Working life: 50000H Beam Angle:120 degrees ♒【IP8 WATER PROOF】High quality PC lamp body, completely sealed design, IP68 waterproof with epoxy filled inside to make it 100% waterproof. Controller battery: 23A,12V(not included) Installation & Precaution INSTALLATION STEPS: 1. Install the pool light 2. Connect the transformer 3. Switch on the power PRECAUTION: 1. Make sure power is off before installing or removing; 2. Don't use the light longer than 10min when it's above the ground;（it's an underwater light） 3. Don't install the light excess 1.5ft/50cm under the water;（prevent excessive water pressure） 4. Transformer power should exceed the total power of all pool lights. ( prevent burn out) Pinkelin 11.6'' Pool Lights for Inground Pool, AC12V 45W Pool Lights Underwater with 23A 12V Controller Battery, 2500LM - 11 Changing Modes, RGB LED Pool Light... ♒【7 COLORS + 2 CHANGING MODES】Equipped with a remote controller, it has two color change modes: flash and scroll; It can provide 7 kinds of color, red/green/blue/yellow/purple/teal/white, you can choose the color according to your desire. 30 Amp RV Extension cord 25 ft with 90-Degree holder TrekPower – trekpower Pool Lights , Inground Pool Light With 4Pcs IP68 Inground Pool Light For Pool Ip68 Inground Swimming Light Pool Lights for Inground Pool, 1.5 Inch LED Color Inground 7 Colors + 2 Color Change Modes LED color-change submersible pool light provided you with 3 RGB and 4 mixed colors red/green/blue/yellow/purple/teal/white It has two dynamic modes: flash and scroll. Additionally, if don't connect the transformer to the light or if it is too low, the light may burn out and can't turn on. We strongly recommend using the provided parts and drill again. Installing in place or using own parts may not be compatible. Two batteries for remote control: 23A 12V. Remote Control Power cord lengh: 4.9Ft/1.5m, pool light is equipped with a remote controller, In the case of no occlusion, the effective control distance is 40Ft/12m. Widely used in swimming pool, bathtub, home aquarium,fountains, ponds, waterfalls, saline and seawater environment etc. Color-Change Led Submersible Light, Pool Light Underwater Pond Light ♒【WIDE APPLICATION】Great for high bay, low bay, swimming pools and wherever high output lighting is needed. ♒【PRODUCT PARAMETER】45 Wattage: 45W(4500lms, 450 pc leds); Voltage input: AC12V; Light Dia: 11.6inch/29.5cm; Back mounting plate LxW: 7inch x 1.96inch/18cm x 5cm; Power cord lengh: 4.9Ft/1.5m; Controller battery: 23A,12V(not included); remote underwater control range: 6.56ft
