Voltage to PWM: Module operating voltage :DC 5V-12V Output PWM frequency: about 50KHZPWM amplitude :5V Conversion range :0-5V/0-10V Voltage conversion :0%-100%PWM Pin Description VCC: The working power supply is 12V to 30V. VOUT: Output voltage 0-10V. PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital To Analog Signal PWM Adjustabl Converter Power Module 主要亮點 ; 品牌. Canson ; 顏色. Golden Beige ; 材料. Paper ; 紙張尺寸. 19.69x25.6 ; 紙張表面處理. Smooth Description: The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals. It can be used as signal... PWM to Voltage 0-100% to-10V Converter Module Product parameters PWM conversion voltage: Module operating voltage :DC 12v-30v; (Power requirement: greater than 100MA) PWM signal receiving frequency range :1KHZ-3KHZ; PWM signal input level range: Peak-peak value is 4.5V to 10v, and the jump pin is inserted at 5V. GND: indicates the output voltage ground.|||| Monday Kids PWM To Voltage Converter Module 0%-100% To 0-10V For PLC MCU Digital To Analog Signal PWM Adjustabl Converter Power Module PWM: Input PWM signal positive end. GND: negative end of the input signal. By adjusting the PWM duty ratio to adjust the output voltage, V-PWM can be 0-5V-10V voltage into Chen Baoguo 0-100% PWM output, by adjusting the voltage to adjust the PWM duty ratio. PWM digital signals are converted into O to 10v analog signals. GND: indicates the working power source.
