USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended) Package include:3pcs ESP32-S3 and 1pc x 50CM USB Type-C Cable Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC on a breadboard Package include: 3pcs x ESP32-S3-DevKit C Board + 1pc x 50CM USB Type-C Cable. 39175-2BTA6 42G ECU Original Engine Computer Board Electronic Control Unit Fit for Hyundai Car MED17.9.8 ; Warranty: 1 Years ; Place of Origin: Guangdong, China Aazon.co: SANXIXING 3PCS ESP32 S3 Developent Board 2.4G WiFi BT... ESP32-CAM Wireless IoT Vision Development Board ESP32-S3-DevKitC-1-N16R8 SPI voltage: 3.3 V, ESP32-S3-DevKitC-1 is an entry-level development board equipped with Wi-Fi + Bluetooth Module ESP32-S3-WROOM-1 Hardware Setup: Connect the board with the computer using USB-to-UART Port or ESP32-S3 USB Port. Software Setup: Please proceed to Get Started, where Section Installation will quickly help you set up the development environment and then flash an application example onto your board. ESP32-S3-WROOM-1-N16R8 cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication Es Board YEJMKJ ESP32 S3 DevKitC 1 N16R8 ESP32 S3 Development Board WiFi + Bluetooth MCU Module, Dual Type C ESP32 S3 WROOM 1 Cores Microcontroller Processor Esp32 Breakout Board
