1PC New Yaskawa JVOP-181 USB Programming Cable Free Shipping JVOP181 The product can be used to change the speed limit and set the wheel diameter. SHMANO Nexus nter-3 SG-3R40 Push Rod 86.85mm for 176.8mm axle | eBay Programming Cable 1M USB Programming Length For Bafang 8fun / BBS01B BBS02B BBSHD Mid Drive / Center Electric Bike Motor Programmed Cable Mid Drive Motor Fixes Incorrect Displayed Speed: Are you frustrated with erroneous speed readings on your display due to mismatched wheel diameter settings on your motor? With this USB programming cable, you can correct these discrepancies, bringing back accurate data readings. USB Programming Cable Speed Limit Release Wheel Diameter Setting for Bafang M600 M510 M500 Mid Drive Motor CAN Protocol ; Delivery: Apr 12 - 18 ; US $0.70 coupon... It ensures seamless compatibility and performance. Wheel Diameter Setting: The cable allows you to set your wheel diameter and release the speed limit effortlessly. This flexibility lets you tailor your settings to your specific needs, improving performance and ensuring a smoothly ride. The user friendly design of this programming cable ensures easy setup and use. Easy Connection: Simply connect the motor, turn on the power, attach the cable to the motor and display and plug the USB end into your computer or screen. Supports Various Wheel Diameters: The programming cable button enables you to set a wide range of wheel diameters, including 29 inches, 27.5 inches, 26 inches, and 20 inches. How to Use: Introduction and of programming line buttons: 1. Press 1 time in a row: wheel diameter 29 inches 60KM/H ‑2330mm 2. Press 2 times in a row: wheel diameter 27.5 inches 60KM/H ‑2240mm 3. Press 3 times in a row: wheel diameter 26 inches 60KM/H ‑2100mm 4. Press 4 times in a row: wheel diameter 20 inches 60KM/H ‑1550mm 5. Press 5 times in a row: wheel diameter 27.5 inches 25KM/H ‑2240mm Introduction: 1. Connect the motor and power on 2. Connect the motor to the main line of the instrument 3. Connect the interfaces at both ends of the programming cable to the motor and the display screen respectively 4. Connect the USB plug of the programming cable to the USB interface of the computer or display screen 5. The programming line indicator lights up to indicate that the connection is successful.
