When the first breakpoint to stop the clock, the seconds of outflow time is the viscosity value of the sample to be measured. Ford Flow Cup #4 Ford Cup Viscosity Testing with Hole Diameter 4.10 mm Measuring Range 70-370 CST Outflow Time 20-105 sec for Viscosity Measurement... Maesurement Range：70-370 cSt immediately with a suitable solvent for its cleaning. Usage before use should be selected with a suitable solvent to wipe the inner wall of the cup (Note: Please pay special attention to the cleaning of the cup body holes, can be twisted into a rope of soft paper, in the outflow holes in the repeated pull); and then dry in the air or with a cold wind blowing dry, do not allow the past measurement of the liquid residue adhering to the cup or the outlet of the flow. Adjust the Ford Cup holder so that the top horizontal bubble is centred. Never use metal cleaning tools or wire. the selection of appropriate cup number, in order to control the outflow time between 20 ~ 80 seconds (see technical parameters) the test solution is stirred and filtered in not less than 567 holes / cm2 of the sieve, and make the sample and outflow cup temperature adjustment to (23 ± 0.5 ℃) or another agreed temperature the sample will be injected into the Ford Cup, at the same time with a finger to block the outflow hole (if corrosive liquids can be used to block the outflow hole baffle), filled with a metal or glass plate in the cup scraping, excess sample scraped into the viscosity cup edge grooves, placed to take over the cup. Flow time: 20-105 sec specifications Cup volume: 100±1ml Diameter of hole: 4.10 mm Pioneer DJ DDJ-REV7 Serato Controller Review - Digital DJ Tips 4 Ford Viscosity Cup with Stand Viscosity Cup at Best Price in New Delhi, Delhi Metkorp Equipments Pvt. Ltd Used to determine the viscosity of inks, paints, lacquers, etc. Flow Measure Ford Flow Cup Ford Cup Viscosity Testing NO.4 With Volume 100±1ml 70-370 CST Ford Cup 4 Dimensions
