OEM Part Number: 33171131903 Fitting Instructions: 1.Remove the original bush and clean away any dirt and corrosion, remembering to also file away and sharp edges. 2. Insert the two Polyurethane Bushes into the bore in the arms. This handle powers from a Sony L-Series Battery (F550/570) and can send power to the Nucls Nano II Hand Wheel for extended battery life. The Control Handle features a focus dial on the front that can be used to control both Nucls Series Motors and even the DJI Focus Motor (requires optional Wireless Receiver Module REAR DIFF REAR MOUNTING BUSH PFR5-632 BMW E32 7 Series (1988-1994) 2 x Powerflex PFR5-1625 PU bush Rear Diff Mounting Bush BMW E21 - Car... Powerflex Rear Diff Rear Bushing, BMW E9X & F3X 3 Series / F2X 2 Series E82 1 Series Ensure the brims of the Polyurethane Bushes are facing the inside of the car, as shown in Figure 1. Make sure the two Polyurethane Bushes sit flush inside the bores. 3. Apply some of the supplied grease to the outer surface of the Stainless Steel Sleeve, and insert it into the bore of the Polyurethane Bush, until it sits flush within the Bore. 4. Insert the Stainless Steel Washer into the recessed section of the Polyurethane Bush, until it sits flush. 5. Assemble the Zinc Plated Mild Steel Washer to the outer face of the Polyurethane bush and refit the arm, ensuring to tension all hardware to the manufacturer's torque settings. For BMW E32 & E34 Powerflex BLACK Rear Diff ... - UK All Powerflex products come with Manufacturer's Lifetime Warranty. This part fits the following models: BMW E34 5 Series (1989-1995) As with all of our Road Series parts, these new differential bushes are covered by our Lifetime Warranty for the ultimate fit-and-forget peace of mind.
