fitments fitments 1982-02 for Chevrolet Camaro Free shipping on Injen SP Series Short Ram Intake System SP2092P . We are an authorized dealer, & offer a 1-year price match guarantee MANUFACTURE--The body of WHEEL ADAPTERS 5x4.75 to 5x4.5 is made of Forged aluminum. ADVANTAGE--5 lug WHEEL ADAPTERS 1.25 INCH Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and instantly,greatly improve the vehicle stability Aazon.co: 5x4.75 Wheel Spacers 2(50) Bore 70.5 with 12x1.5... 5x114 To 5x120 Adapters 4X 25mm Thick Wheel Adapters 5x120.65 To 5x114.3 For Chevrolet Camaro 5x5 To 5x4.75 Wheel Adapters 1983-94 for Chevrolet S10 Blazer (Only rear, only on 2WD) 1.25") Ford 5x4.5 axle to Chevy Camaro S10 Corvette 5x4.75 rim WHEELS Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength In this case you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs. VERIFY FITMENT-- 5x4.75 to 5x4.5 Wheel Adapters Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.5mm threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 87.1mm,advise torque specs at 70-80 Ft/Lbs PARAMETER-- 1.25 inch WHEEL ADAPTERS SPACERS with 1.25 Thick; 5x4.75 Vehicle Bolt Pattern; 5x4.5 Wheel Bolt Pattern; 12x1.5 Wheel Studs; 87.1mm Center Bore Wheel Spacers FITMENT--5x120.65 to 5x114.3 WHEEL ADAPTERS Replacement Fit for 1982-1988 for Monte Carlo 1982-2004 for S10 1983-1994 for S10 Blazer If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation Your Factory wheel studs may extend past the surface of the wheel spacers.
