Benchtop Milling Machine Vacuum Clamping Table CNC Chuck HG3015M Engraving Or Machining, USA Made Cnc Vacuum Chuck Fixture Brine Shrimp | NatureRules1 Wiki | Fandom Upgraded Rapid Adsorption Plate: compares with most vacuum plate fixtures on the market, it does not need sealing strips and glue, or any other tools to fix the workpiece, convenient, quick, and easy! CNC Router Vacuum Table for CNC Aluminium Wood Plastic Workholding PS: for over-work processing, it may be needed to drain the cutting oil in the plate by the steps below: keep the vacuum switch(es) on and turn off the negative port, and then connect the positive port to the air compressor to drain the cutting oil from the adsorption holes(for 10-20 s), and then blow the drained cutting oil. Tips: 1.It’s highly recommended to work with a vacuum pump system (with tank) for enough negative pressure, it can also work with a vacuum generator and air compressor (with tank) for simple applications. Separately Adsorption Hole Design: each hole (448 pcs) comes with a built-in filter, which effectively prevents the metal chips block the hole, even if one hole was blocked, it will not affect other holes' working and ensure the processing finishing. It is suitable for a variety of material workpieces: it can fix different materials and shapes workpiece with 100% flat base, like stainless steel, wood, PVC, etc. (note: the square of the workpiece base is recommended larger than 10 x 10 cm， and the height of the workpiece should be between 3 – 25 mm) Designed for a wide range of machines, this vacuum chuck fixture plate easily integrates with CNC machining centers, lathes, milling, and engraving machines...
