Once the PEI sheet is attached, re-level your print bed and you are ready to go! REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling. PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. borosilicate glass) using the 3M 468MP adhesive transfer tape. 3d Printer Build Surface 220mm Gizmo Dorks PEI Sheet - 10x10, 1mm Thick - 3D Nigeria | Ubuy Pei Sheet 12 X 12 Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results Due to aggregation of reviews, this is for Gizmo Dorks PEI sheet with 3M adhesive I have an Anet A8 and use this with a borosilicate glass plate, After 2 months using this I cannot imagine needing another build surface for any filament type.Using a thermal camera I find the surface to be of uniform temperature, and a sensor measures just 3C... The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down. ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Includes: 1x PEI sheet, 1x full size 3M 468MP adhesive transfer tape Die Cutting 3m 468MP Double Sided Tape - 3m 468MP and 3m Transfer Tape Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed. 8Pcs Sponge Tyre Insert Inlay Replacement for 1in Rubber Tire RC Climbing Car Accessories Visit the VGEBY Store 5.0 4 ratings | Search this page Remove the blue protective film from the PEI sheet. How to Use: Cut the PEI sheet to size by scoring with a hobby knife.