The diode has an optical isolation of 4,000 VAC, and the device has a voltage rating of 120 VAC and a current rating of 25 amp. It also has a built-in snubber for preventing arcing across contacts. Opto 22 240D25-17 DC Control Solid State Relay, 240 VAC, 25 Ap, 4000 V... One relay can operate multiple switches, and multiple relays can be operated with a single switch, with each relay operating independently from the other relays in the system. MP120D2 - MP Model, 120 VAC, 2 Amp, DC Control 2023 Toyota Prius Details | Thomasville, GA | Thomasville Toyota The panel mount requires the use of a thermal interface material such as a pad or compound (not included) placed between the back of the relay and the conductive panel or heat sink and is attached with screws (not included). Relay switches (also called an electrical relay or an electrical relay switch) use a small amount of power to control a larger source of power connected to electrical devices such as car motors, computers, and lighting installations. Solid State Relay 12v Opto 22 380D25 DC Control Solid State Relay, 380 VAC, 25 Amp, 4000 V 120v Ac Relay This solid state relay is suitable for use in industrial process control applications such as temperature control, motors, lamps, solenoids, valves, and transformers, among others. Built-in snubber for preventing arcing across contacts UL Recognized for safety, CSA and CE certified for quality assurance Solid state relay for fast response and high vibration resistance Relay switches can be controlled with an external switch, such as a light switch, or they can be connected to an automatically switched power source, such as a car ignition. SpecificationsRelay terminalsScrewCoil typeACResistance33 kohmOptical isolation input to output4,000VInput Voltage120 VACCurrent rating25 ampSignal pick-up voltage85 VACSignal drop-out voltage10 VACThermal resistance1.2 C/WOperating temperature-40 to +100 degrees CDimensions*57 x .44.5 x 24.6 mm (H x W x D)Standards metUL (Underwriter's Laboratories)CSA (Canadian Standards Association)CE (European Conformity)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. This Opto 22 120A25 solid state relay provides faster response time than an electromechanical relay and resists vibration. Opto 22 manufactures controllers for automating equipment, input/output (I/O) systems, solid-state relays, and software products that link electric, mechanical, and electronic devices to networks and computers. In other types of relay switches, non-moving parts such as transistors or semiconductors can be used as the control circuit to operate the switching mechanism. Zero-voltage switching to reduce arcing and extend the life of the device
