Engine Harmonic Balancer for Jeep Cherokee 1974-1983 CJ5 CJ6 DJ5 Wagoneer AMC ... 594-739, J3225201, 594739, PB1440N. Quantity Sold One Piece ▶Stakes Size: The tent stake about 12 inches (30cm) long and 0.35 inches (0.9cm) in diameter which is much bigger and stronger than most stakes on the market. ▶EASY TO USE: Metal stopper and sharp tip make it easy to drive the stake into the ground and it is easy to pull out the stake using the hole and the hook on the top. Long and heavy enough to stand against the wind. Long and large tent stakes make sure your camping trip safe in the tents. A big flat head minimizes slipping possibility and the hole on the hook makes it easy to be pulled out! ▶Tips for better use: - Please do not nail the tent stake vertically to the ground. tongina Ground Stake Heavy Duty Tent Pegs Tent Peg Stake Camping Stakes Christmas Spikes Tent Stakes 12 Inch Heavy Duty Tent Pegs Tarp Pegs Camping 12 Tent Stakes Instruction: 1. Put the stake at 60 degree angle on the ground, and keep the hook under the head of the stake facing the ground. 2. Push the stake with a tent hammer into the ground and leave about 1.5 inches out. 3. Fasten the tent rope between the hook and nail. 4. Remove the rope and untie it. 5. Use the hole on the hook to pull the camping stake out with a tent hammer. ▶MULTI-USE: Tent stakes are suitable for nailing tents, canopies dog leash, tarps, and etc. to the ground. ▶12 inch metal ground stakes are widely used in grass, rocks, sand, snow, etc. Lifetechs Camping Tent Stakes Heavy Duty Tent Pegs Rustproof Corrosion... - Please leave about 1.6 inches (4cm) of the tent stake on the ground to have enough room to tight the rope. - Use the hook to tight the rope. ▶STURDY MATERIAL: Made of 45# steel, the surface is electrophoretic black, not easy to bend, and cost-effective.
