Superparis] High Accuracy Wind Speed Sensor Transmitter 485 Anemometer

[Wiring Mode Options] : The wind speed monitoring sensor is versatile with two cable outlet modes, allowing for bottom or side cable outlet installation based on your preference [Weather] : With strong pressure and wind resistance, this anemometer is suitable for various harsh environments, ensuring performance in challenging conditions Spec: Item Type: Wind Speed Monitoring Sensor Material: ABS Size: Approx. 158 x 180 x 70mm / 6.22 x 7.09 x 2.76in Power Supply Voltage: DC9-30V Output: 4-20mA Measurement Range: Wind speed 0~45m/s Extension Line Length: Approx. 0.8m / 2.6ft Accuracy: ±(0.5+0.02V)m/s(V represent real time wind speed value) Resolution: 0.1m/s Startup Wind Speed: ?0.8m/s Maximum Power Consumption: 0.48W Load Capacity: DC12V power supply, current output impedance ?350? DC24V power supply, current output impedance ?900?, voltage output impedance ?1K? Working Environment: Temperature: -35?~60?, Humidity: ?100%RH non condensing Level: IP64 Formula: 4-20mA: F=(I-4)/16xA+B F: Wind speed, m/s; I: Sensor output current value, mA; A: Sensor range width(range upper limit minus lower limit); B: Minimum value of sensor range(lower limit of range); Wire Connection Method: Red Output (voltage): Power supply positive Black Output (voltage): Power supply negative Yellow Output (voltage): Distribution Diameter: Approx. 63mm / 2.48in Mounting Hole Diameter: Approx. 3.2mm / 0.13in Aerial Plug Diameter: Approx. 15mm / 0.59in(recommended to reserve 25mm for wiring, wire connection first, then install and fix the sensor) Weight: Approx. 272.00g / 9.59oz packing list: 1 x Wind Speed Monitoring Sensor Buy Compression Socks for Women and Men Circulation (3 Pairs) - Best for Medical,Nursing,Running,Travel Knee High Socks at Aneóetros Sensor de onitoreo de velocidad del viento 9-30V DC Fuente... Sentec Wd300 RS485 4-20mA Anemometer Wind Speed and Direction Sensor [Extension Cable Included] : Equipped with a 0.8m long connection extension line and featuring a sealing washer design, this wind speed sensor is and convenient for installation High Accuracy Wind Speed Monitoring Sensor, Outdoor Ultrasonic Anemometer 4-20mA 9-30V with Strong Material Interference Resistant Suitable for Harsh Environments [Extension Cable Included] : Equipped with a 0.8m long connection extension line and featuring a sealing washer design, this wind speed sensor is waterproof and convenient for installation. [Strong Material] : The wind cup is crafted from premium abs material, offering high strength, low starting wind speed, and excellent erosion for long-lasting durability Handheld Anemometer Superparis] High Accuracy Wind Speed Sensor Transmitter 485 Anemometer Wind Speed Anemometer