Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft Keyed to both shaft and drive component to provide higher torque carrying capacity Flow Experiences, the Zone and Optimal Performance Martin P1 1 5/8 MST Bushing, Sintered Steel, Inch, 1.63 Bore, 1.9375 OD, 1.94 Length : Bushed Bearings: : Industrial & ScientificProduct Description This Martin P1 MST split taper bushing is made of sintered steel and is used for mounting a split taper bushed pulley, sheave, or sprocket on a drive shaft. It has a solid flange, and the barrel is split in two places to improve... Martin Bushing Model R1 1 15/16" 1.9375" Bore w/ Keyway R1-1-15/16 New This split taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others. Sintered steel for greater strength and resistance to wear than steel Martin Sprocket Bushing Dimensions Artin P1 1 ST Bushing, Sintered Steel, Inch, 1" Bore, 1.9375" OD, 1 Martin Sprocket Mst Bushing Manual Bushings are used in automobiles, construction equipment, and machine tools, among others. Martin Sprocket & Gear manufactures power transmission and conveying products. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. This Martin P1 MST split taper bushing is made of sintered steel and is used for mounting a split taper bushed pulley, sheave, or sprocket on a drive shaft. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component.
