Works great for holding: curtain panels, room dividers, drapes, sheers, and valances Package includes: 1 x 9.8 feet curtain track, accessories included. Material: ABS+Metal+Plastic Buy Bendable Curtain Track With Runners, L-shaped/U-shaped Bay Window Track, Durable Elegant Aluminium Ceiling Curtain Track Rails, For Sliding... Material: Outer nano synthetic PVC, built-in soft steel.Size approx: 4 Meters / 13.1 Feet. It's super flexible so it doesn't matter how sharp or narrow your angles are New Arrival Customize 1m-6m Ripplefold Sealing for L U Curved Curtain Rails Flat Double Layer Alloy Rails Ceiling Curtain Track Curtain Track Bendable Straight Curved Bender Bending Curtain Tracks Suitable for top installation, each meter can withstand 30 kg of weight. Enhance your snowboarding and skating safety with our EVA-padded bike riding shorts, featuring a 25mm thick, impact-resistant design for optimal protection Accessories included：7 carriers(pulleys)/ Per meter; 3 Mounting plates/ Per meter; 2 end-stops for a whole section; Several screws / Per meter Installation method:1. Straighten the curved track first, you can reverse the track around the binding, and then open it will be relatively straight, then make local adjustments.2. To determine the point to be drilled on the wall, drill the hole with bit 6 between 40 centimeters, and must be in the same line, you can drill two holes, then pull a line, drill along the line, two points to determine a straight line3. if it is installed on wood, it does not need to drill holes, and can be fixed directly with wooden screws.4. The track is I-shaped, narrow side up, wide side down (you can observe the end of the track, narrow side is flat, used to clamp support; wide side slightly curved, used to hang pulleys)5. Installation sequence: the wall code is fixed with screws, the track sleeve pulley and seal after the track into the wall code, you can use a word screwdriver to do not push the slider more easily; top code is to hook the top code on the track first, then screw the top code, in the fixed edge of the two top codes before the seal and pulley. Install it.
