Electronic Load 4sets Load Cell Load Cells Kit Weight Sensor +HX711 A/D Amplifier Load Cell Pedals Sailfish Release flags v2.0 – Billfish Gear Application: Kitchen scale Module: YZC-133 Capacity: 1、5、10、20 Rated Output: 1.0±0.15mV/V Nolinearity: 0.0005 Repeatability: 0.0003 Hysteresis: 0.0003 Creep(5Min): 0.001 Temperature Effect On Sensitivity: 0.003%RO/°C Temperature Effect On Zero: 0.02%RO/°C Zero Balance: ±0.1%RO Input Resistance: 1066±20Ω Output Resistance: 1000±20Ω Insulation Resistance: 2000MΩ(50V) Recommended Excitation Voltage: 5V Compensated Temperature Voltage: -10~+50°C Operating Temperature Range: -20~+65°C Safe Overload: 120%RO Ultimate Overload: 150%RO Load Cell Material: Aluminium Connecting Cable: φ0.8X180mm HX711 Ad Module Load Cell Amplifier Green PCB for Arduino Description: ●Two selectable differential input channels ●On-chip active low noise PGA with selectable gain of 3264 and 128 ●On-chip power supply regulator for load-cell and ADC analog power supply ●On-chip oscillator requiring no external component with optional external crystal ●On-chip power-on-reset ●Simple digital control and serial interface: pin-driven controlsno programming needed ●Simultaneous 50 and 60Hz supply rejection ●Current consumption including on-chip analog power supply regulator: normal operation ●Operation supply voltage range: 2.6 ~ 5.5V ●Operating Temperature Range:-20 degree ~ +85 degree Package included 4 X Weight Sensor 4 X HX711 A/D Module Weighing Machine Using Arduino Load Cell Hx711 Module - vrogue.co Particular attention must not directly push the white plastic cover part, so as not to damage the sensor. Made of high quality aluminium alloy, parallel beam structure, suitable for electronic kitchen scales, small appliances force measurement, pet feeders and other intelligent weighing equipment You will get 4sets (load cell weight sensor + HX711 A/D Module) Connection：Red to E+ / Black to E- / Green to A+ / White to A- CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half...
