Seal-Krete 3.2 oz. Clear Grip - Anti-Skid Additive-402002 - The Home Depot When texture is achieved, apply a sealer coat. 2 Band Saw Belt for Ryobi BS901 Replaces BS90104400. Brand New - Unused Parts. Fits Ryobi Ridgid BS901 9" Band Saw. Replaces Part Numbers: 106XL037, BS90104400 Non Skid Boat Paint FIXALL Skid Grip Anti-Slip Acrylic Paint - Textured Coating For 100 Rustoleum Anti Skid Additive Allow to tack up, blow off excess particles and then apply a final coat. Fasco Epoxies FAS-Grip Anti-Slip Paint Additive for Floor Coatings COARSE Non-Skid Particles - Half Pint for 1 Gallon. Item #: 49929811. 0 ratings Write a... Method #1: For spray brush or roll application, add 10oz of FAS-GRIP non skid particles to 1 gallon of coating. Available in coarse and fine grades FAS-GRIP will stir easily into most coatings with minimal effect on the coating viscosity. Unique Polymer Absorbs the paint so it stays the same color as it wears Due to it’s spherical shape, FAS-GRIP is not highly abrasive, and is easy to clean due to its lack of sharp edges. The low density of FAS-GRIP allows it to stay suspended in the coating rather than sinking like sand type additives. Works Great for 2-Part Epoxy, Urethane, Gelcoats, and Enamels Method #2: Apply a tack coat to the non-skid area and then broadcast the FAS-GRIP particles (via a perforated shaker apparatus) to the wet area.
