Three Easy Steps and done Cleans A/C Condensate Drain Lines without having to access the drain pan Use PVC fittings, if necessary to attach vinyl hose. 3.) Flow Nitrogen, CO2 or water through the Sludge Sucker and watch the sludge and algae get sucked out of the drain line and blown out onto the ground. Compatible with: Honda 1995-1996 FourTrax Foreman 400. Tie Rods Specs: Thread Type Male-Male; Thread Sizes: M12x1.25; Length (cm): 29; Weight: 260g; Material: Iron Steel Uniweld Nitrogen Sludge Sucker | Use with 3/4 in. PVC Condensate Lines... Sludge Sucker Maintenance - Uniweld Products, Inc. IN The Sludge Sucker’s clear vinyl hose is attached to the 3/4-Inch PVC condensate drain line on the outside of the building. Product Description Uniweld 40000 Sludge Sucker The Sludge Sucker is a tool that was developed to clean out a condensate drain line without having to access the drain pan located in the A/C System's Air Handler. With the use of Nitrogen, CO2 or water suction is created that pulls all the sludge and algae from the drain pan and drain line; then blows it onto the ground outside. Three Easy Steps: 1.) Locate condensate drain line. 2.) Attach Sludge Sucker vinyl hose to condensate drain line which fits inside a 3/4-Inch PVC fitting. Clears condensate drain lines of sludge and algae in seconds Mud Pump UNIWELD 40000 3/4 Inch Pvc Use With All Lines Sludge Sucker
