AS5048 14-Bit Magnetic Encoder Precision PWM SPI Interface For Brushless Motor e 【Convenient To Measurement】: The AS5048A Magnetic Encoder provides PWM output and or I2C interface to provide absolute angle measurement for the microcontroller. BMX Grips Old School Style - Flanged Rubber Mushroom Krayton Rubber. £9.48 ; 1 Pair Handle Bar Grips Mushroom Grips For BMX/Road Mountain/Bikes. £6.29 Ams As5048a AS5048A Agnetic Encoder PW Controller Electric Coponents With Non As5048 1.3 Datasheet 【High Technology】:The Motor Encoder is a 14-bit rotary position sensor (formerly called encoder) for absolute angle measurement and PWM (= pulse width modulation) at 360 degree based on non-contact magnetic sensor technology full-rotation output AS5048 provides PWM output and SPI or I2C interface to provide absolute angle measurement for the microcontroller. In the mechanical designing, there is no need... Spec: Item Type: Magnetic encoder Resolution: 14-Bi Feature: 1. The product is featured with 14-Bit rotary position sensor digital angle (interface) and pulse width modulation output. 2. as5048a is a 14-bit rotary position sensor (formerly called encoder) for absolute angle measurement and PWM (= pulse width modulation) at 360 degree based on non-contact magnetic sensor technology full-rotation output 3. The device is suitable for shaft applications where a simple two-pole magnet rotates the sensor IC or below and the 0 position can be programmed into the device with simple commands. The absolute magnetic angular position resolution is 14 bits In the mechanical designing, there is no need to consider the exact pairing of the initial 0 position of the chip and the magnetic poles of the magnets it uses. The absolute magnetic angular position resolution is 14 bits = 16384 for position measurement, and each revolution is a serial interface (SPI) with digital values. 4. AS5048 provides PWM output and or I2C interface to provide absolute angle measurement for the microcontroller. 【Widely Be Used】:The PWM Magnetic Encoder is suitable for shaft applications where a simple two-pole magnet rotates the sensor IC or below and the 0 position can be programmed into the device with simple commands. 【Strong Adaptability】: The Electric Components also has a very high operating tolerance, including the deviation of the center position between the chip and the paired magnet, the deviation of the air gap between the chip and the paired magnet, and the temperature change between -40°C and +150
