Alstar 9x50 Angled Finder Scope - Bundle With - Triple Finder Scope Mount Bracket

Extremly flexible through 9 countersunk bores: three M6 bores at 38 mm distance square on both sides; one in the middle with two drilled but not threaded to accommodate screws up to 6 mm in diameter center to center screw hole spacing is from 35 to 63 mm A safe and precise clamping of your telescope: Whether you want to clamp a telescope from Vixen, Skywatcher, Orion..., you simply attach a GP level dovetail bar to the telescope. Areal clamping with two clamping screws; protects the accessories and provides a very stable connection The clamp is especially suited for building double connections where a high load capacity is needed. Use any combination of three aiming devices you wish including finder scope; red dot reflex sights; green laser pointer brackets; mini guide scopes and more; Attach three finder scopes or other aiming devices to your telescope quickly and easily Accommodates three finder scopes simultaneously; Each finder is securely clamped with two screws; Using different types of finder at the same time; you can find your favourite objects easier and faster; In the end All functions, especially the clamping, are completely kept. Dimensions: 87 mm x 87 mm approx; 116 mm with screw; 9 bores allow connecting to almost all surfaces Opticstar ARC Finderscope Bracket 50mm & Leg Base @ Meade Use any combination of two aiming devices you wish including finder scope, red-dot reflex sights, green laser pointer brackets, mini guide scopes, and more. You... NIDAIFEI 2 Pack Greased AM144608 Spindle Assembly for John Deere Z335E X350 S240 X380 X580 Z345R X394 Z335 Z540 Z525E Lawn Deck, John Deere Z335E Spindle , X394 48 in Deck Spindles , Z540 Deck Spindles Meade Star Pro Alstar 9x50 Angled Finder Scope - Bundle With - Triple Finder Scope Mount Bracket Celestron Eq Wedge With the quick coupling, you can attach your telescope or camera safely. With most telescopes, this bar is already included. Technical Details: Suitable for: GP level dovetail bars. The clamp itself can be adapted to a mount, to the counterweight shaft or another dovetail bar, building a double connection. The wall thickness is constructe for highest loads. M6 Bores: three M6 bores at 38 mm distance square on both sides, one M6 bore in the middle with two drilled (but not threaded) to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 35 to 63mm.