Tsubaki 50B11F-1 Finished Bore Sprocket, Single Strand, Inch, #50 ANSI No., 5/8 Note: The speed of the sprocket should not over that allowed by a drive sprocket of the same size. Skyway Tuff II 20-inch 5 Spoke 20-inch Rear - Mad Dog Cycles | Orem, UT Uxcell 2pcs ISO/DIN 06B-1 Roller Chain Sprocket B Type 16mm Bore, 3/8" Pitch, A3-Steel Single Strand Roller Sprocket Hardened 16 Tooth It is suggested that the sprocket has at least three teeth meshed with the chain. 2pcs SO/DN 06B-1 Roller Chan Sprocket B Type 12mm Bore, Hardened 13... They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft. Material: The sprocket is made of A3-steel, and the teeth are high-frequency quenched, which exhibits high hardness and wear resistance. Each sprocket with 2pcs set screws at 90 degrees. It ensures high transmission efficiency when transferring energyInstallation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operationsFeature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. Size: 2pcs B type mechanical chain sprockets 16 teeth, 16mm bore, 3/8 (9.252mm) pitch, 5mm keyway. Each roller sprocket has strong teeth that latch onto the chain.
